When slitting coated paper, the sheets have dusty edges. What can be done to minimize this problem? Slitter dust that accumulates at the center slit is attributed to misadjusted or worn slitter blades. check the settings and blade condition, replacing the top knives or bottom rings as required. Slitter dust that occurs on the outside […]
News & Events
The latest news from Maxson Automatic Machinery Company
News & Events
On short cut offs, the leading edge of the sheet follows the fly knife. My operator slows down the machine. What can be done to increase speed?
On short cut offs, the leading edge of the sheet follows the fly knife. My operator slows down the machine. What can be done to increase speed? It might be that the cross cutting blades are dulling, and not cutting cleanly through the web. Check the knives for sharpness or adjust for greater clash. Improper […]
When I run multiple webs of light weight material, it sometimes wrinkles prior to cutting. How do I avoid that?
When I run multiple webs of light weight material, it sometimes wrinkles prior to cutting. How do I avoid that? This is a common problem if the webs have baggy centers or edges. When the webs come together, static may cause them to stick together (especially on coated grades). If a web is baggy, it […]
How do I eliminate “checking” or “alligatoring” (the fracturing the board surface) at the decurl station?
How do I eliminate “checking” or “alligatoring” (the fracturing the board surface) at the decurl station? This problem usually occurs on heavier board grades, when the Operator attempt to overcome the curl set created in the web near the core. There are four factors to consider in avoiding “checking”: 1. Core Size – If possible […]
Products A-Z
{vmcatplugin}
Our Products
{vmcatplugin}
A+ Effort Leads to Prosperity and Growth for ABOX PACKAGING
As a custom folding carton manufacturer, Abox Packaging located in Kaufman TX has been on the fast track to success because of the company’s dedication to quality and service. As owner Keith Thompson says, “No one is allowed to say no, only “Here’s what we can do”.” And with the addition of a Maxson MDH […]
Northwestern Converter Gains Competitive Edge with MAXSON DFK Sheeter
Today’s marketplace, quality and fast turnaround are vital in providing a company with a competitive edge. Richard Gunderson recognized the need for such a sheeting operation with those qualities to service the Pacific Northwest area and in 1994 he founded Pacific Sheeting Resources (PSR). Based in Tacoma, Washington, PER has a customer base that spans […]
Cut-to-Register Sheeting Trims Time and Labor Cost
At Unifoil Corporation, Passaic Park, NJ improved product quality and faster turnaround are the results of a $1.5 million capital investment in optically registered sheeting, steam sheeting and embossing equipment. The company’s recent purchase includes a DFK Sheeter from Maxson Automatic Machinery Company, the Steam-Foil System from Thermo Web Systems and an embosser/calendar from Verduin […]
Case Studies
{loadposition mod_case}
