Author: Scott

Able to run a single web of grades as light as 10# paper or multiple rolls for greater production, the sheeter can produce between 9″ – 24″ (228 – 610 mm) lengths. Equipped with a slitter rig, an incoming web can be slit into as many as seven streams to produce multiple pile service across […]

Outfitted with a dual knife rotary cutter that can produce lengths as short as 10″ (254 mm), the sheeter can also cut to registration marks on preprinted material. The cutting section provides clean, “crumb free” edges on product up to 0.060″ thick. Furnished with non-ferrous surfaces to overcome run ability problems associated with magnetic materials, […]

Capable of operating at speeds of up to 1300 fpm (398 mpm), the Mill Duty Sheeter’s revolutionary dual knife rotary cutter design utilizes a lightweight composite material resulting in higher speeds on short cutoffs. Available in widths of up to 100″ (2540 mm), the Sheeter can deliver cut offs from 15″ – 80″ (381 – […]

Capable of converting up to 56″ (1422 mm) wide rolls, the MSE Sheeter can produce cut offs from 15″ – 50″ (381 – 1270 mm) long. The machine’s compact foot print makes it ideal for short order and low volume work on all types of material up to 0.020″ (0.5 mm) thick. Outfitted with a […]

Designed for fast and easy size changes, the MSS Sheeter reduces downtime associated with set-up by up to 50 percent. The new sheeter can precisely slit and sheet to an accuracy of +0.015″ (+0.381 mm), eliminating the need to guillotine trim. In addition, the cutter can be outfitted with an automatic mechanism that maintains +0.020″ […]

The UL certification assures the Customer that MAXSON’s equipment has completed an independent, rigorous evaluation process of engineering design, component selection and electrical wiring that meets or exceeds local authority standards. 

The MSS Sheeter is available in widths up to 57″ (1447 mm). Outfitted with a slitter rig, it can produce finished custom sizes in multiple piles. Incorporating an automatic squaring feature and electronic sheet length control that maintains + 0.015″ (+ 0.381 mm) accuracy, size changes require less than 2 minutes. Because cleanliness of the […]

The vibrating back jogger system mounts at the end of the delivery system and protrudes out over the stacker’s load table. By positioning the standardized pallet against the stacker’s backstop, up to 4″ (100 mm) offset of the pile, relative to the skid, can be achieved. In this design, compressed air is introduced at the […]

The cutter’s dual knife technology allows for heavy cutting loads on up to 0.040″ thick (1000 gsm) material while maintaining accuracies of + 0.015″ on sheet lengths and requiring no squareness adjustment. Available in trim widths up to 65″ (1651 mm) the cutter’s standard configuration allows for a 16″ – 65″ (407 – 1651 mm) […]

The sheeter’s drives, logic controller and operator interface have thousands of self diagnostic annunciated faults that identify the specific location or cause of a problem. These faults can be viewed remotely either through a modem using the serial port provided or using the Ethernet port tied into the site’s local area network. In cases where […]